Frank House on executing Engraved Script

Frank House originally shared this post on the CLA facebook page

Alright Engravers,

Time to take a big next step in grasping the concept of executing script engraving.....

90234374_1067789803577609_8392498364196847616_n.jpg

First of all, it's important to understand the concept of shading... this where the Art of engraving comes to the fore.

Executed deftly, the work has that wonderful, yet subtle "Pop" that even great calligraphy can't quite match.

This next exercise is learning to draw your characters as if you would engrave them.... in other words, refine your script as if it is finished, shaded and detailed.

Script is basically cut from two directions, up-cuts and down-cuts, taking advantage of ones natural ergonomic abilities. Simply stated, it's far easier to control your cuts if executed on a outside arc than one on a inside arc, therefore the work is accomplished from two directions(photos).

90498826_1067789670244289_7407060273233657856_n.jpg
90471591_1067789770244279_1197817270198337536_n.jpg
90673473_1067789733577616_7695382840858378240_n.jpg

The graver is started vertical and rolled away to the outside of the cuts as one proceeds, rolling the graver both back vertically and out to finish the cut, accomplishing the shading on curved cuts.

Vertical cuts are somewhat simpler.

Gradually allow the graver to consistently cut deeper until the finished depth and result are achieved.

The exercise here is to draw and lay-out your design as if you were engraving it. Incorporate the shading, incorporate the up and down cuts as you lay your work drastically speeds the process and helps one to grasp the concept.

90291958_1067789826910940_3582694188828852224_n.jpg

I'm certain folks will have questions, I'll do my best....

Stay with me, we'll get there.

Upwards and onwards!